Whether you are using it on your hair, beard or your client’s, keeping your clippers clean is a basic hygiene requirement. Not only that, cleaning them in the right way increases their efficiency and makes them last for a long while.
The good news is that it is a simple task and there are several ways of doing this. Read on to know how you can keep your Babyliss clippers squeaky clean.
How to Clean Your Babyliss Clippers?
The build-up of dirt, oil and hair on your clippers will damage them which will require you to replace them often. Moreover, there are high chances of you getting shaving injuries from them.
Before you begin, switch off the power button of your clipper. In case it is mains operated, unplug and disconnect the power cable. After this, you can start the actual cleaning process by following any of these simple methods-
-
Try Brushing
Use any stiff brush for brushing your clippers clean. You can use a clean toothbrush that you have lying around for this purpose. However, if you want the best results then you can buy speciality micro-brushes, which are made for this specific purpose. Barbers and stylist suppliers usually stock products like these.
When you have your brush, just gently drag it back and forth on the clippers to remove all traces of hair.
-
Use Soap and Water
If you have used your clippers for a light shave, you can give it a rubdown in soapy water to get it clean. There are two ways of doing this. You can make a solution by mixing a dollop of dish soap in a bowl of water. Then dunk the blades of the clipper in it and move it back and forth till all the debris is gone. After that gently pat the blades with a cotton ball or clean cloth.
You can also put the soap directly on the clipper blades and run it under warm water. The next step will be to gently wipe the blades with a cloth.
-
Disinfect with Alcohol
Soaking the blades of your clippers in 70% isopropyl alcohol will keep them clean as well as get rid of bacteria. Take a cup and fill it with alcohol and water in approximately 3:1 ratio. Then submerge your clipper blade into the solution for a minute or so. The hair and dirt will immediately slide off into the solution.
After a minute, get it out and wipe it to dry it and remove the excess solution.
-
Make Use of Distilled Vinegar
Distilled white vinegar is a great way to sanitise and disinfect clipper blades at home. If you cannot get your hands on anything else, then you can use this home remedy for cleaning your Babyliss clippers. Fill a cup with distilled white vinegar and dip the blades in it for around 30 seconds.
After getting the clipper out, run it under water and towel dry it to remove traces of the vinegar solution.
-
Use Clipper Spray
If you are using your Babyliss clippers professionally, then a clipper cooling spray is a great option for swift cleaning. The special formulation of these products helps to get rid of dirt, oil and hair from the clipper blades. At the same time, they also help to dissipate the heat and cool the blade down.
For using this, turn on the clipper, spray the product on the blades and keep it running for a few seconds. Then turn it off and wipe the clipper with a cotton ball or clean cloth.
Oiling the Clipper BladesÂ
Oiling the clipper blades is an important step in maintaining it in good shape. You should do this every time you clean your clipper. For this, you have to use only special oil formulated for clipper blades. These can withstand high temperatures and do not clog the mechanism.
Apply 2-3 drops of oil across the clipper blades and spread it across carefully. Make sure that the oil does not enter the electrical compartments.
If your clippers are in good shape, you will get a great shaving experience. To elevate it further, you can use Proraso shaving cream which is specially made to give you a close comfortable shave.
The importance of keeping your Babyliss clippers clean cannot be overstated. You should do a thorough cleaning every time you use it to maintain hygiene standards.
